Factory directly supply 6312 Conveying equipment Export to Lithuania
Factory directly supply 6312 Conveying equipment Export to Lithuania Detail:
Product detail pictures:
Related Product Guide:
How a Roller Bearing Works
Introduction to Bearings
Usually customer-oriented, and it's our ultimate focus on being not only one of the most responsible, trustable and honest provider, but also the partner for our clients for Factory directly supply 6312 Conveying equipment Export to Lithuania, The product will supply to all over the world, such as: Ecuador , Muscat , Belgium , Our company promises: reasonable prices, short production time and satisfactory after-sales service, we also welcome you to visit our factory at any time you want. Wish we have a pleasant and long terms business together!!!
(Always Remember: To prevent serious eye injury always wear safe eye protection when performing vehicle maintenance or service and follow recommended safety procedures.)
To adjust a wheel bearing on a trailer axle, first torque the inner adjusting nut to 200 ft. lbs. to seat the bearing rollers and the wheel seal. Always rotate the hub while torqueing the nut. Torque the adjusting nut to 200 ft. lbs. while rotating the hub. Then back the nut off one turn. Now, torque the nut to 50 ft. lbs. then back it off 1/4 turn. Install the retaining hardware and torque the jam nut to the proper specifications. For nuts less than 2 5/8″ 200-300 ft. lbs. and nuts greater than 2 5/8″ 300-400 ft. lbs, install the dial indicator and check in play. In play should be within 1 — 5000ths of an inch. If the in play is not within specs re-adjust the inner nut to obtain the correct in play.
By Norma from Monaco - 2015.11.28 16:25
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
By Ina from Macedonia - 2016.07.07 13:00